invention

Winner's Platform

by CaptainToad8

Published on January 24, 2017

Place the winner of the game's piece on the platform and watch it spin!

How To Make It

1

Attach the battery cable to the battery (9V).

2

Attach the battery cable to the power bit

3

Attach the split bit (that rhymes!) to the power bit.

4

Place the split and the power bits on the mounting board as shown (the flat part of the mounting board should be facing up)

5

Attach the bargraph bit to one side of the split bit.

6

Place the bits on the mounting board as shown.

7

Attach the slide dimmer bit to the other side of the split bit.

8

Set the DC motor to 'cw' and attach it to the dimmer.

9

Place the bits on the mounting board as shown.

10

Take the wire out of the part of the motor that's holding it down.

11

Find a huge twist tie and put it through the motor. Then, place the motor upright and stick the twist ties through the holes in the mounting board so that the motor stands straight up.

12

Tie the wires down with string or a twist tie.

13

Put the wheel on the motor.

14

Decorate a relatively small box to your liking.

15

Trace the wheel and cut out the circle a little bit bigger than the actual wheel.

16

Place the box over the bits and have fun!!